No products
Prices are tax included
Catalog
Kanalski sistem MaxVent There are 125 products.
Subcategories
-
Horizontal flat elbow of different angles...
Turning point angle from 3° to 48°.Depending on selected turning angle one connector side is cut out.Direct connection to matching sized ductsHigh-quality plastic
6,83 €In Stock -
Flange D160
For duct connection For wall or ceiling mounting Fixing with screws Direct connection with round air ducts High-quality plastic
4,39 €In Stock -
-
Connector for round ducts central D100/125
For the connection of air ducts of different diameterDirect connection with round air ductsHigh-quality plastic
4,39 €In Stock -
Locking ring for flange D125
Used in supply and exhaust ventilation systems for the connection of flexible ducts together Provided the construction simplicity of a ventilation system. Diameters: 100 mm; 125 mm. Made of high-quality plastic.
4,39 €In Stock -
Connector between square section 100x100...
For connecting rectangular ducts with round ducts. High-quality plastic
4,39 €In Stock -
T-joint for round ducts D160
For the connection of air ducts of the same diameter.Direct connection with air ducts of the corresponding diameter.Direct connection with round air ducts.High-quality plastic.
9,27 €In Stock -
Flange D200
For duct connection For wall or ceiling mounting Fixing with screws Direct connection with round air ducts High-quality plastic
4,39 €In Stock -
Round duct holder D160
For air duct fastening Fixing with screws High-quality plastic
4,39 €In Stock -
4.39 €
-
Holding fastener with sealant for round...
For air duct connection and its fastening Fixing with screws Equipped with seal elements for end-to-end fixing Easy mounting/ disassembling High-quality plastic
8,17 €In Stock -
-
-
-
Holding fastener with sealant for round...
For air duct connection and its fastening Fixing with screws Equipped with seal elements for end-to-end fixing Easy mounting/ disassembling High-quality plastic
10,25 €In Stock -
35.99 €
Aluminum tape with glassfiber mesh 50 mm x...
• Designed for sealing of ventilation systems.• LM - made of aluminum foil with hot melt.• LMT - material: geotextiles, coated with polyethylene, with the adhesive surface.• LMA - made of aluminum armoured foil with base of kraft paper and canvas.• LMS - made of armoured aluminum foil with a base of fiberglass.
28,79 € 35,99 € -20%Reduced price!In Stock -
-
-
Connector for rectangular ducts 60x204
For the connection of flat ductsDirect connection to matching sized ductsHigh-quality plastic
4,39 €In Stock -
-
-
Eccentric connector for round ducts D125/160
For the connection of air ducts of different diameterHigh-quality plastic
4,39 €In Stock -
-
Round duct D125, L 1,5m , PVC
Supply and exhaust ventilation of various premises.Connected with connecting elements of the corresponding diameter.Material: PVC.
16,96 €In Stock -
-
-
Rectangular duct 60x120, L 1m, PVC
For supply and exhaust ventilationConnected with fittingsPVC
13,66 €In Stock -
Horizontal flat elbow 90° for rectangular...
Horizontal connection to air ducts at 90° angleDirect connection to matching sized ductsHigh-quality plastic
9,88 €In Stock -
-
Round duct D160, L 1,5m, PVC
Supply and exhaust ventilation of various premises.Connected with connecting elements of the corresponding diameter.Material: PVC.
25,61 €In Stock -
Round duct D160, L 2m, PVC
Supply and exhaust ventilation of various premises.Connected with connecting elements of the corresponding diameter.Material: PVC.
26,11 €In Stock -
Locking ring for flange D100
Used in supply and exhaust ventilation systems for the connection of flexible ducts together Provided the construction simplicity of a ventilation system. Diameters: 100 mm; 125 mm. Made of high-quality plastic.
2,20 €In Stock -
-
-
-
Round elbow 90° D125
For the connection of air ducts of the same diameter at 90°angle.Direct connection with round air ducts.High-quality plastic.
8,66 €In Stock -
Vertical flat elbow 90° for rectangular...
Vertical connection to air ducts at 90° angleDirect connection to matching sized ductsHigh-quality plastic
4,39 €In Stock -
T-joint between rectangular ducts 55x110...
For complex ventilation systems Direct connection with rectangular ducts,for the connection to round ducts with a connector High-quality plastic
8,05 €In Stock -
Eccentric connector for round ducts D100/125
For the connection of air ducts of different diameterHigh-quality plastic
4,39 €In Stock -
Round duct D125, L 2m, PVC
Supply and exhaust ventilation of various premises.Connected with connecting elements of the corresponding diameter.Material: PVC.
20,98 €In Stock -
-
Rectangular duct 60x120, L 2m, PVC
For supply and exhaust ventilationConnected with fittingsPVC
19,15 €In Stock -
Round elbow 90° D150
For the connection of air ducts of the same diameter at 90°angle.Direct connection with round air ducts.High-quality plastic.
9,88 €In Stock -
Removable grill with adjustable flow...
For supply and exhaust ventilation, air conditioning and air heating systems. Wall or ceiling mounting. Grills have inclined louvers. Equipped with a moving element for air flow regulation. Air flow is regulated with a flag. Fixing is carried out by means of screws. Made of high-quality plastic.
12,44 €In Stock -
Round elbow 90° D150
For the connection of air ducts of the same diameter at 90°angle.Direct connection with round air ducts.High-quality plastic.
9,88 €In Stock -
15.86 €
Flexible armoured air duct, metallized...
Maximum length in a stretched form is 10m ;Wire step : 28 mm;Wall thickness: 70 microns.
7,93 € 15,86 € -50%Reduced price!In Stock -
Steel hose clamp 120-140 mm, width 9 mm
• For fixing of channeled aluminum ducts, rubber hoses and adapters.• Material: Stainless steel.
1,34 €In Stock -
-
-
Round duct D100, L 1,5m, PVC
Supply and exhaust ventilation of various premises.Connected with connecting elements of the corresponding diameter.Material: PVC.
12,20 €Out of stock -
Round duct D100, L 2m, PVC
Inlet and exhaust ventilation of various rooms. Connected with connecting elements of the appropriate diameter. Material: PVC.
15,74 €Out of stock -
Round duct D125, L 0,5m, PVC
Supply and exhaust ventilation of various premises.Connected with connecting elements of the corresponding diameter.Material: PVC.Connected with connecting elements of the corresponding diameter.Material: PVC.
6,22 €Out of stock -
Connector for round ducts D125
For the connection of air ducts of the same diameter.Direct connection of air vents of the corresponding diameter.High-quality plastic.
3,90 €Out of stock -
Central universal connector for round...
For the connection of air ducts of different diameter The case is cut for receiving a reducer with necessary diameters Direct connection with round air ducts High-quality plastic
6,22 €Out of stock -
Rectangular duct 60x204, L 1m, PVC
For supply and exhaust ventilationConnected with fittingsPVC
16,10 €Out of stock -
Rectangular duct 60x204, L 2m, PVC
For supply and exhaust ventilationConnected with fittingsPVC
29,65 €Out of stock -
90° connector between rectangular duct...
Direct connection with rectangular ducts and flangeair dispensers Availiable for the connection to round ducts with a connector High-quality plastic
6,83 €Out of stock -
Round duct holder D100
For air duct fastening Fixing with screws High-quality plastic
2,93 €Out of stock -
Butt strap 264x119 for rectangular duct...
For decoration of mounting holesFixing with screwsDirect connection to matching sized ductsHigh-quality plastic
4,39 €Out of stock -
47.46 €
Flexible armoured air duct, with thermal...
• Maximum length in a stretched form is 10m.• Wire step : 28 mm.• Wall thickness: 70 microns.• Has an insulation layer of 30mm.
23,73 € 47,46 € -50%Reduced price!Out of stock
