Anti-vibration and insulated wall duct for recuperator Ø160 mm (3° slope) - 500mm

Anti-vibration insulated wall duct Ø160 mm with an outer diameter of Ø200 mm – ideal for recuperators 500mm long

Introducing a high-quality anti-vibration and thermal insulated wall duct Ø160 mm, designed for professional ventilation and recuperation systems. The duct is intended for all recuperators with an actual width of 160 mm (outer housing measurement), making it the perfect solution for accurate, stable, and quiet installation in residential and commercial buildings.

Robust insulation, integrated 3-degree slope, and anti-vibration structure allow for minimal heat losses, quieter operation, and safe condensation drainage. Due to the outer diameter of Ø200 mm, a hole larger than 200 mm must be drilled during installation, ensuring perfect fit and stable mounting.

The product is ideally compatible with MFH Systems Solos 2.0 recuperators. For other recuperator models, we recommend checking the dimensions.

Key advantages of the anti-vibration insulated wall duct

1. Complete compatibility with recuperators 160 mm wide

The duct is designed as an optimal solution for all local and decentralized recuperators that have a real width of Ø160 mm.
Such construction allows for:

• stable attachment,

• precise centering of the device,

• reduction of vibrations during operation.

2. Outer diameter Ø200 mm for professional installation

Due to the outer dimension of Ø200 mm, the wall opening is optimally stable and allows for quick installation without additional spacers or filling materials.

3. Integrated 3° slope – correct mounting without guessing

The duct has an integrated 3-degree tilt, meaning:

• the opening must be 100% horizontal,

• the product itself ensures the correct slope outward,

• there is no risk of condensation returning to the recuperator.

This saves time for installers and reduces the chance of errors.

4. Advanced thermal insulation against thermal bridges

Quality insulation prevents:

• heat losses,

• condensation inside the duct,

• cooling of fresh air during winter operation.

5. Anti-vibration design

The material absorbs vibrations from the recuperator during installation and minimizes the transmission of shocks to the wall – ideal for bedrooms, living spaces, and quiet operation.

Where is the insulated duct Ø160/200 mm used?

The product is intended for:

• decentralized recuperators (MFH Systems Solos 2.0 and compatible models),

• ventilation systems for residential buildings,

• energy-efficient ventilation for new builds and renovations,

• buildings where reduced vibration and noise are critical.

For more solutions, check the category Air recuperation.

Technical specifications